Ventoflex

SKU: VFTH12N09S30K Category:

Product Description

Bend the Rules of Lighting Design with VentoFlex Tiles
VentoFlex Flexible Copper Clad Laminate (FCCL) sheets can be mounted directly to most any non-conductive interior surface with no requirement for a heat sink. Featuring 90 CRI Luxeon LEDs in a wide range of color temperatures, VentoFlex tiles provide seamless uniform illumination of luminous surfaces at setback distances as low as 2 inches.

Ambient lighting is all about creating the right mood. VentoFlex helps designers set the exact tone and aesthetic they intended, wither it’s a backlit lobby, decorative wall or something that hasn’t even been imagined yet. With VentoFlex, lighting design is no longer limited by flat surfaces — the tiles mount to any surface and can bend to 90 degrees and beyond.

Available in 12″x12″ square tiles, these innovative LED tiles can be cut and formed around any design element, including rounded corners and tight spaces without taking up much room at all — 0.15 (3.81mm). A pair of scissors is the only tool required to cut VentoFlex tiles to the size and shape you desire.

VentoFlex can link up to 10 or 15, 12” x 12” tiles to one Class 2 LED Driver, all on the same 0-10V or DALI dimmer. That’s 1440 or 2160 square inches of versatile lighting power! When connecting tiles together, the cables don’t have to physically touch each other, enabling even more design flexibility.

Additional Information

Mounting Type

Mount to Any Surface

Viewing Angle

140 degree viewing angle

Luminous Efficacy

100 lm/W (See efficacy table)

Operation Supply Voltage

48 VDC

MSL Rating

Mounting Hardware

Staples/Nails/Screws/Double Sided Tape

RoHS

REACH Compliant

Yes

Conflict Mineral Free

Yes

Harmonization Code

8531.90.75.00

ECCN

EAR99

Country of Origin

MX (Mexico)

Product Status

New Product Introduction (NPI)

SKU Description Datasheet STEP File IGES File
VFTH12N09S30K Bend the Rules of Lighting Design with VentoFlex Tiles VentoFlex Flexible Copper Clad Laminate (FCCL) sheets can be mounted directly to most any non-conductive interior surface with no requirement for a heat sink. Featuring 90 CRI Luxeon LEDs in a wide range of color temperatures, VentoFlex tiles provide seamless uniform illumination of luminous surfaces at setback distances as low as 2 inches. Ambient lighting is all about creating the right mood. VentoFlex helps designers set the exact tone and aesthetic they intended, wither it’s a backlit lobby, decorative wall or something that hasn’t even been imagined yet. With VentoFlex, lighting design is no longer limited by flat surfaces — the tiles mount to any surface and can bend to 90 degrees and beyond. Available in 12″x12″ square tiles, these innovative LED tiles can be cut and formed around any design element, including rounded corners and tight spaces without taking up much room at all — 0.15 (3.81mm). A pair of scissors is the only tool required to cut VentoFlex tiles to the size and shape you desire. VentoFlex can link up to 10 or 15, 12” x 12” tiles to one Class 2 LED Driver, all on the same 0-10V or DALI dimmer. That’s 1440 or 2160 square inches of versatile lighting power! When connecting tiles together, the cables don’t have to physically touch each other, enabling even more design flexibility.