Case Study
Manual Electric Motor Starter
Application Characteristics
Like the name implies, a manual electric motor starter is used to turn a motor on and off using a button or switch mounted directly to the wall or machine cavity. But that is only half of the story — they also control the current throughout, establishing and interrupting the electric power in order to prevent the motor from drawing too much current and overheating or burning out.
In industrial applications, manual electric starters are ideal for protecting from dangerous motor overload while providing safe and low-cost operation.
Common uses for manual electric motor starters are low-horsepower, single-phase motor loads, such as small air compressors and exhaust fans.
Solution & Design
A pilot light encased in the panel illuminates to communicate with the operator. By replacing the neon pilot light indicator with a more efficient LED lamp, the client’s manual electric motor starter would provide users with a longer-lasting bulb that is much more efficient.
But the manufacturer’s design specifications would not work with any available standard LED indicators. In order to save the client the expense of redesigning the motor starter units themselves, VCC designed a custom solution tailored to very specific design requirements, including:
- Four different voltage ranges
- Red and green color options
- High visibility during daylight hours
- Wire leads 4.25” long
- LED width at tip not to exceed 0.40”
- Entire voltage range recognized by cULus
- Compliance with REACH and RoHS
To achieve the client’s goal of replacing its neon indicators with energy-saving LEDs, VCC designed eight custom additions to the L34 Series, two red and two green, in the following voltage ranges:
- 110-120VAC/DC
- 110-240VAC/DC
- 208-277VAC/DC
- 440-600VAC/DC
To achieve the client’s goals for maximum daytime visibility, the custom VCC L34 Series indicators provided a 120-degree viewing angle.
The L34 Series indicators were designed to easily snap into place without the use of additional hardware. Color-coded wire leads also improved assembly speed during production.
L34 Series
The L34 Series was used to enhance the design with custom and rugged LED indicators, which included a cylindrical housing that could fit inside a small domed lens. The indicators use a snap-fit for installation without additional hardware.
In addition to red and green indicators, the L34 Series includes yellow options for greater flexibility in visual communication. While there are several standard options in the L34 Series, VCC can customize a solution to fit a wide range of unique design specifications.
Results & Benefits
By upgrading from a neon indicator to custom L34 Series indicators, the client — and its end users — can enjoy:
Enhanced energy efficiency and bulb life that LEDs deliver
- Significant energy savings – up to 50 percent less energy consumption
- Extended bulb life – lamps last four times longer life than neon
- Reduced downtime for maintenance – no maintenance associated with bulb replacement
Daylight visibility for enhanced safety
The brightness and viewing angle of the design ensure the end user can see the status of the motor starter at all times, improving operator safety.
Custom fit prevents costly redesign of motor starter units
The custom indicator solutions provided in the L34 Series saved the client from the costly endeavor of redesigning the motor starter units to accommodate standard illumination components.
Streamlined production times with snap-fit design
Production times were streamlined thanks to color-coded lead wires and snap-fit LED components.
Value-Added Services
The VCC team leveraged extensive engineering expertise to quickly design a prototype that met the client’s unique specifications. The custom solution prevented the client from having to redesign its motor starter units while providing a long-lasting, energy-efficient solution.
Are you ready for next level illuminated components?
Start a conversation with one of our technical engineers today. Contact UsPanel Mount Indicator
LED Watertight PMI Build Your Own Indicator Neon Incandescent More
Circuit Board Indicators
LEDs
Latest Products
Check all the Latest Products
Custom Wire Harness
Custom Solutions
Custom Design Capabilities
Technical Resources
Product VideosBrochuresCustom SolutionsNewsCase StudiesFAQsGlossaryVideo Webinar
Purchasing
Product
Videos
Learn more about our products
The Latest
Contact
Contact Us
Call Us 1.800.522.5546